| 전자부품 데이터시트 검색엔진 |
|
STM32F051R6 데이터시트(PDF) 72 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F051R6 데이터시트(HTML) 72 Page - STMicroelectronics |
|
72 / 104 page ![]() STM32F051x Electrical characteristics Doc ID 022265 Rev 3 73/105 Output driving current The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink or source up to +/- 20 mA (with a relaxed VOL/VOH). In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 6.2: ● The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDD (see Table 18). ● The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSS (see Table 18). Output voltage levels Unless otherwise specified, the parameters given in Table 51 are derived from tests performed under ambient temperature and VDD supply voltage conditions summarized in Table 20. All I/Os are CMOS and TTL compliant (FT, TTa or TC unless otherwise specified). Table 51. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL (1) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 18 and the sum of IIO (I/O ports and control pins) must not exceed IVSS. Output low level voltage for an I/O pin when 8 pins are sunk at same time CMOS port(2) IIO = +8 mA 2.7 V < VDD < 3.6 V 2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. -0.4 V VOH (3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 18 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin when 8 pins are sourced at same time VDD–0.4 - VOL (1) Output low level voltage for an I/O pin when 8 pins are sunk at same time TTL port(2) IIO =+ 8mA 2.7 V < VDD < 3.6 V -0.4 V VOH (3) Output high level voltage for an I/O pin when 8 pins are sourced at same time 2.4 - VOL (1)(4) 4. Data based on characterization results, not tested in production. Output low level voltage for an I/O pin when 5 pins are sunk at same time IIO = +20 mA 2.7 V < VDD < 3.6 V -1.3 V VOH (3)(4) Output high level voltage for an I/O pin when 5 pins are sourced at same time VDD–1.3 - VOL (1)(4) Output low level voltage for an I/O pin when 8 pins are sunk at same time IIO = +6 mA 2 V < VDD < 2.7 V -0.4 V VOH (3)(4) Output high level voltage for an I/O pin when 8 pins are sourced at same time VDD–0.4 - VOLFM+ Output low level voltage for an FTf I/O pin in FM+ mode IIO = +20 mA 2.7 V < VDD < 3.6 V -0.4 V |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |