| 전자부품 데이터시트 검색엔진 |
|
MCP98244 데이터시트(PDF) 3 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP98244 데이터시트(HTML) 3 Page - Microchip Technology |
|
3 / 52 page ![]() 2012-2013 Microchip Technology Inc. DS22327C-page 3 MCP98244 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings † VDD.................................................................................. 4.0V Voltage at all Input/Output pins ............... GND – 0.3V to 4.0V Pin A0 .......................................................GND – 0.3V to 11V Storage temperature .....................................-65°C to +150°C Ambient temp. with power applied ................-40°C to +125°C Junction Temperature (TJ) ..........................................+150°C ESD protection on all pins (HBM:MM) ................. (4 kV:200V) Latch-Up Current at each pin (25°C) ....................... ±200 mA †Notice: Stresses above those listed under “Maximum ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. TEMPERATURE SENSOR DC CHARACTERISTICS Electrical Specifications: Unless otherwise indicated, VDD = 1.7V to 3.6V, GND = Ground, and TA = -40°C to +125°C. Parameters Sym Min Typ Max Unit Conditions Temperature Sensor Accuracy +75°C < TA +95°C TACY -1.0 ±0.2 +1.0 °C JC42.4 - TSE2004B1 Grade B Accuracy Specification VDD = 1.7V to 3.6V +40°C < TA +125°C -2.0 ±0.5 +2.0 °C -40°C < TA +125°C -3.0 ±1 +3.0 °C Temperature Conversion Time 0.5°C/bit tCONV —30 — ms 0.25°C/bit — 65 125 ms 15 s/sec (typical) (See Section 5.2.4) 0.125°C/bit — 130 — ms 0.0625°C/bit — 260 — ms Power Supply Specified Voltage Range VDD 1.7 — 3.6 V Operating Current IDD_TS — 100 500 µA EEPROM Inactive Shutdown Current ISHDN — 0.2 1 µA EEPROM Inactive, I2C Bus Inactive, TA = 85°C Power On Reset (POR) VPOR — 1.4 1.6 V Threshold for rising and falling VDD Settling Time after POR tPOR — — 1 ms For warm and cold power cycles Line Regulation °C — 0.2 — °C VDD = 1.7V to 3.6V Event Output (Open-Drain output, external pull-up resistor required), see Section 5.2.3 High-Level Current (leakage) IOH —— 1 µA VOH = VDD Low-Level Voltage VOL —— 0.4 V IOL= 3 mA (Active-Low, Pull-up Resistor) Thermal Response, from +25°C (Air) to +125°C (oil bath) TDFN-8 tRES — 0.7 — s Time to 63% (89°C) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |