TC1240AECH datasheet(9/18 Pages) MICROCHIP

부품명	TC1240AECH

상세설명	Positive Doubling Charge Pumps with Shutdown in a SOT-23 Package

PDF	18 Pages

Scroll/Zoom	100%

제조업체	MICROCHIP [Microchip Technology]

홈페이지	http://www.microchip.com

Logo

9 / 18 page

 2001-2012 Microchip Technology Inc.

DS21516D-page 9

TC1240/TC1240A

5.4

Input Supply Bypassing

The VIN input should be capacitively bypassed to

reduce AC impedance and minimize noise effects due

the

switching

internal

the

device.

The

recommended capacitor should be a large value (at

least equal to C1) connected from the input to GND.

5.5

Shutdown Input

The TC1240 and TC1240A are disabled when SHDN is

high, and enabled when SHDN is low. This input cannot

be allowed to float.

FIGURE 5-3:

Test Circuit.

5.6

Voltage Doubler

The most common application for charge pump

devices is the doubler (Figure 5-3). This application

uses two external capacitors – C1 and C2 (plus a power

supply bypass capacitor, if necessary). The output is

equal to 2 x VIN minus any voltage drops due to

loading. Refer to Table 5-1 and Table 5-2 for capacitor

selection.

VIN

VOUT

TC1240

TC1240A

C-

VIN

OUT

C+

GND

SHDN

Device

TC1240

TC1240A

3.3 µF

TC1240AECH 데이터시트(PDF) 9 Page - Microchip Technology

TC1240AECH 데이터시트(HTML) 9 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

데이터시트 다운로드

링크 URL