TMP01

Rev. E | Page 5 of 20

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

Maximum Supply Voltage

−0.3 V to +15 V

Maximum Input Voltage (SET HIGH, SET LOW)

−0.3 V to V+ +0.3 V

Maximum Output Current (VREF, VPTAT)

2 mA

Maximum Output Current (Open-Collector

Outputs)

50 mA

Maximum Output Voltage (Open-Collector

Outputs)

15 V

Operating Temperature Range

−55°C to +150°C

Die Junction Temperature

150°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature (Soldering 60 sec)

300°C

Digital inputs and outputs are protected; however, permanent

damage may occur on unprotected units from high energy

electrostatic fields. Keep units in conductive foam or packaging

at all times until ready to use. Use proper antistatic handling

procedures.

Remove power before inserting or removing units from their

sockets.

Table 4.

Package Type

Unit

8-Lead PDIP (N-8)

1031

43

°C/W

8-Lead SOIC (R-8)

1582

43

°C/W

8-Pin TO-99 Can (H-08)

1501

18

°C/W

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION