LIS352AR datasheet(11/15 Pages) STMICROELECTRONICS

부품명	LIS352AR

상세설명	MEMS motion sensor: 3-axis 2 g analog-output

PDF	15 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

11 / 15 page

LIS352AR

Application hints

Doc ID 16933 Rev 1

11/15

The tolerance of the internal resistor can vary ±15% (typ) from its nominal value of 32 k

Ω;

thus the cut-off frequency will vary accordingly. A minimum capacitance of 2.5 nF for CLOAD

(x, y, z) is required.

An external capacitor can be added to the Vout pin. Values below 10 pF are recommended.

6.1

Soldering information

The LGA package is compliant with the ECOPACK®, RoHs and “Green” standard.

It is qualified for soldering heat resistance according to JEDEC J-STD-020C.

Leave “pin 1 Indicator” unconnected during soldering.

Land pattern and soldering recommendations are available at www.st.com.

Table 6.

Filter capacitor selection, CLOAD (x,y,z)

Cut-off frequency

Capacitor value

1 Hz

µF

10 Hz

0.5

µF

20 Hz

250 nF

50 Hz

100 nF

100 Hz

50 nF

200 Hz

25 nF

500 Hz

10 nF

Table 7.

MUX I/O table

S1 pin

S0 pin

MUX status

Vout = Voutx

Vout = Vouty

Vout = Voutz

Vout = Aux_in

LIS352AR 데이터시트(PDF) 11 Page - STMicroelectronics

LIS352AR 데이터시트(HTML) 11 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

데이터시트 다운로드

링크 URL