 2001-2012 Microchip Technology Inc.

DS21389D-page 1

TC1410/TC1410N

Features

• Latch-Up Protected: Will Withstand 500 mA

Reverse Current

• Input Will Withstand Negative Inputs Up to 5V

• ESD Protected: 4 kV

• High Peak Output Current: 0.5A

• Wide Input Supply Voltage Operating Range:

- 4.5V to 16V

• High Capacitive Load Drive Capability:

- 500 pF in 25 nsec

• Short Delay Time: 30 nsec Typ.

• Consistent Delay Times With Changes in Supply

Voltage

• Matched Delay Times

• Low Supply Current

-

With Logic ‘1’ Input: 500 µA

-

With Logic ‘0’ Input: 100 µA

• Low Output Impedance: 16



• Available in Space-Saving 8-pin MSOP Package

• Pinout Same as TC1411/TC1412/TC1413

Applications

• Switch Mode Power Supplies

• Line Drivers

• Pulse Transformer Drive

• Relay Driver

General Description

The TC1410/TC1410N are 0.5A CMOS buffers/drivers.

They will not latch-up under any conditions within their

power and voltage ratings. They are not subject to

damage when up to 5V of noise spiking of either

polarity occurs on the ground pin. They can accept,

without damage or logic upset, up to 500 mA of current

of either polarity being forced back into their output. All

terminals are fully protected against up to 4 kV of

electrostatic discharge.

As MOSFET drivers, the TC1410/TC1410N can easily

charge a 500 pF gate capacitance in 25 nsec with

matched rise and fall times, and provide low enough

impedance in both the ‘ON’ and ‘OFF’ states to ensure

the MOSFET’s intended state will not be affected, even

by large transients. The leading and trailing edge

propagation delay times are also matched to allow

driving short-duration inputs with greater accuracy.

Package Type

8-Pin MSOP/PDIP/SOIC

1

2

3

4

5

6

7

8

OUT

GND

IN

NC

GND

OUT

NC = No Connection

2

6,7

Inverting

2

6,7

Non-Inverting

1

2

3

4

5

6

7

8

IN

NC

GND

OUT

GND

OUT

NOTE: Duplicate pins must be connected together

for proper operation.

0.5A High-Speed MOSFET Drivers