Evaluation Board User Guide

UG-435

Rev. 0 | Page 9 of 20

EVALUATION BOARD SOFTWARE

The control software for the EVAL-ADF4351EB1Z accompanies

the EVAL-ADF4351EB1Z on a CD. To install the software, see

the Software Installation section.

To run the software, click the ADI ADF435x file on the desktop

or in the Start menu.

On the Select Device and Connection tab, choose your device,

your connection method, and click Connect.

Confirm that SDP board connected, ADF4xxx USB Adapter

Board connected, or Analog Devices RFG.L Eval Board

connected is displayed at the bottom left of the window.

Otherwise, the software has no connection to the evaluation

board.

Note that, when connecting the board, it takes about 5 sec to

10 sec for the status label to change.

Under the File menu, the current settings can be saved to and

loaded from, a text file.

Figure 18. Software Front Panel Display—Select Device and Connection