| 전자부품 데이터시트 검색엔진 |
|
PCIF1 데이터시트(PDF) 33 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
PCIF1 데이터시트(HTML) 33 Page - ATMEL Corporation |
|
33 / 294 page ![]() 33 9219A–RFID–01/11 Atmel ATA5505 [Preliminary] The CKSEL0 Fuse together with the SUT1..0 Fuses or CSEL0 together with CSUT1..0 field select the start-up times as shown in Table 4-7. Notes: 1. Flash Fuse bits. 2. CLKSELR register bits. 3. These options should only be used when not operating close to the maximum frequency of the device, and only if frequency stability at start-up is not important for the application. These options are not suitable for crystals. 4. These options are intended for use with ceramic resonators and will ensure frequency stabil- ity at start-up. They can also be used with crystals when not operating close to the maximum frequency of the device, and if frequency stability at start-up is not important for the application. 5. This setting is only available if RSTDISBL fuse is not set. 4.2.5 Low-frequency Crystal Oscillator To use a 32.768kHz watch crystal as the clock source for the device, the low-frequency crystal oscillator must be selected by setting CKSEL fuses or CSEL field as shown in Table 4-1 on page 29. The crystal should be connected as shown in Figure 4-3. Refer to the 32.768 kHz Crystal Oscillator Application Note for details on oscillator operation and how to choose appro- priate values for C1 and C2. The 32.768kHz watch crystal oscillator can be used by the asynchronous timer if the (high-fre- quency) Crystal Oscillator is not running or if the External Clock is not enabed (See ”Enable/Disable Clock Source” on page 36.). The asynchronous timer is then able to start itself this low-frequency crystal oscillator. Table 4-7. Start-up Times for the Crystal Oscillator Clock Selection CKSEL0(1) CSEL0(2) SUT1..0(1) CSUT1..0(2) Start-up Time from Power-down/save Additional Delay from Reset (V CC = 5.0V) Recommended Usage 0 00 258CK(3) 14CK + 4.1ms Ceramic resonator, fast rising power 0 01 258CK(3) 14CK + 65ms Ceramic resonator, slowly rising power 010(5) 1K (1024)CK(4) 14CK Ceramic resonator, BOD enabled 0 11 1K (1024)CK(4) 14CK + 4.1ms Ceramic resonator, fast rising power 1 00 1K (1024)CK(4) 14CK + 65ms Ceramic resonator, slowly rising power 101(5) 16K (16384)CK 14CK Crystal Oscillator, BOD enabled 1 10 16K (16384)CK 14CK + 4.1ms Crystal Oscillator, fast rising power 1 11 16K (16384)CK 14CK + 65ms Crystal Oscillator, slowly rising power |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |