 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
DOC1925 데이터시트(PDF) 51 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
DOC1925 데이터시트(HTML) 51 Page - List of Unclassifed Manufacturers |
|
|
51 / 61 page  AVR STK500 User Guide 6-1 Rev. 1925C–AVR–3/03 Section 6 In-System Programming of an External Target System The STK500 can be used as a programmer to program AVR devices in other applica- tions. There are two different ISP connector pinouts available: a 6-pin and a 10-pin version. Both are supported by STK500. Figure 6-1. 6-pin ISP Connector Pinout Figure 6-2. 10-pin ISP Connector Pinout Select the device to be programmed in the same way as programming a device on the STK500. The V CC of the target application is detected by STK500 and signals are con- verted into voltage levels suitable for the target system. Note: If the other application has its own power supply to VTG, the jumper VTARGET must be removed before connecting STK500 to the other application. STK500 may be damaged if the VTARGET jumper is not removed. VTG MOSI GND MISO SCK RST 1 2 ISP6PIN VTG GND GND GND GND MOSI NC RST SCK MISO 1 2 ISP10PIN |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
