MCP4441 datasheet(3/100 Pages) MICROCHIP

3 / 100 page

DS22265A-page 3

MCP444X/446X

1.0

ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings †

Voltage on VDD with respect to VSS ................ -0.6V to +7.0V

Voltage on HVC/A0, A1, SCL, SDA, WP, and

RESET with respect to VSS ................................... -0.6V to 12.5V

Voltage on all other pins (PxA, PxW, and PxB)

with respect to VSS ......................................... -0.3V to VDD + 0.3V

Input clamp current, IIK

(VI < 0, VI > VDD, VI > VPP ON HV pins) ......................±20 mA

Output clamp current, IOK

(VO < 0 or VO > VDD) ..................................................±20 mA

Maximum output current sunk by any Output pin

......................................................................................25 mA

Maximum output current sourced by any Output pin ed

......................................................................................25 mA

Maximum current out of VSS pin .................................100 mA

Maximum current into VDD pin ....................................100 mA

Maximum current into PXA, PXW & PXB pins ............±2.5 mA

Storage temperature ....................................-65°C to +150°C

Ambient temperature with power applied

..................................................................... -40°C to +125°C

Package power dissipation (TA = +50°C, TJ = +150°C)

TSSOP-14....................................................... 1000 mW

TSSOP-20....................................................... 1110 mW

QFN-20 (4x4) .................................................. 2320 mW

Soldering temperature of leads (10 seconds) ............. +300°C

ESD protection on all pins

................................... ≥ 4 kV (HBM),

..........................................................................

≥ 300V (MM)

Maximum Junction Temperature (TJ) .........................+150°C

† Notice:

Stresses above those listed under “Maximum

Ratings” may cause permanent damage to the device. This is

a stress rating only and functional operation of the device at

those or any other conditions above those indicated in the

operational listings of this specification is not implied.

Exposure to maximum rating conditions for extended periods

may affect device reliability.

MCP4441 데이터시트(PDF) 3 Page - Microchip Technology

MCP4441 데이터시트(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

데이터시트 다운로드

링크 URL