| 전자부품 데이터시트 검색엔진 |
|
USB-TO-GPIO 데이터시트(PDF) 17 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
USB-TO-GPIO 데이터시트(HTML) 17 Page - Texas Instruments |
|
17 / 50 page ![]() www.ti.com 3.9 Set I2C-PMBUS-SMBUS Speed Command and Response 3.10 Generic I2C Write Command and Response Set I2C-PMBUS-SMBUS Speed Command and Response USB PACKET COMMAND BYTE 0 USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET COMMENTS DESCRIPTION COMMAND BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTES 6–63 CODE A (0 for Set 100 kHz, 0x1B I2C-PMBUS- otherwise SMBUS Speed 400 kHz) USB PACKET COMMAND BYTE 0 USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET COMMENTS DESCRIPTION COMMAND BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTES 6–63 CODE Response from Done with Set 0x9B speed I2C-PMBUS- selection SMBUS Speed For I2C, PMBUS, or SMBUS communications, the clock speed can be set to either 100 kHz or 400 kHz. As an I2C, PMBUS, or SMBUS master, the USB interface adapter supports clock stretching (up to 25 ms per transaction). The firmware sets the default clock speed to 100 kHz. USB PACKET COMMAND BYTE 0 USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET COMMENTS DESCRIPTION COMMAND BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTES 6–63 CODE The first byte of data to write is usually Generic I2C 0x1C A A number of bytes (from 2 up to 62) to write (device Write address < 1 + write bit of 0). USB PACKET COMMAND BYTE 0 USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET USB PACKET COMMENTS DESCRIPTION COMMAND BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTES 6–63 CODE Response from Success: 0 0x9C Generic I2C Fail: 1 Write This is a generic I2C Write transaction command that can be applied to majority of I2C applications. The detailed bit-banking is as follows: I2C start → repeat (write 1 data byte, slave ACK) for A number of times → I2C stop. Basically, all the transaction bytes are placed one after another, such as address byte (7-bit slave address shifted left by 1 bit + write bit of 0), one or multiple command bytes, one or multiple data bytes into the A number of bytes buffer space, then the USB interface adapter carries out the bit banking. For maximum flexibility, this generic command for any I2C write transaction is recommended. SLLU093 – August 2006 Firmware Programming and Communications Protocol 17 Submit Documentation Feedback |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |