| 전자부품 데이터시트 검색엔진 |
|
APW8821 데이터시트(PDF) 3 Page - Anpec Electronics Coropration |
|
|
|||||||||||||||||||||||||||||
APW8821 데이터시트(HTML) 3 Page - Anpec Electronics Coropration |
|
3 / 24 page ![]() Copyright © ANPEC Electronics Corp. Rev. A.1 - Feb., 2011 APW8821 www.anpec.com.tw 3 Absolute Maximum Ratings (Note 1) Symbol Parameter Rating Unit VCC VCC Supply Voltage (VCC to GND) -0.3 ~ 7 V VBOOT-GND BOOT Supply Voltage (BOOT to GND ) -0.3 ~ 35 V VBOOT BOOT Supply Voltage (BOOT to PHASE) -0.3 ~ 7 V All Other Pins (FB, VOUT, POK, and REFIN to GND) -0.3 ~ VCC+0.3 V UGATE Voltage (UGATE to PHASE) <20ns Pulse Width >20ns Pulse Width -5 ~ VBOOT+0.3 -0.3 ~ VBOOT+0.3 V LGATE/OCSET Voltage (LGATE to GND) <20ns Pulse Width >20ns Pulse Width -5 ~ VCC+0.3 -0.3 ~ VCC+0.3 V VPHASE PHASE Voltage (PHASE to GND) <20ns Pulse Width >20ns Pulse Width -5 ~ 35 -1 ~ 30 V TJ Maximum Junction Temperature 150 oC TSTG Storage Temperature -65 ~ 150 oC TSDR Maximum Lead Soldering Temperature, 10 Seconds 260 oC Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom- mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Symbol Parameter Typical Value Unit θ JA Thermal Resistance -Junction to Ambient (Note 2) TDFN3x3-10 55 °C/W Note 2: θ JA is measured with the component mounted on a high effective the thermal conductivity test board in free air. The exposed pad of package is soldered directly on the PCB. Recommended Operating Conditions (Note 3) Symbol Parameter Range Unit V IN Converter Input Voltage 1.8 ~ 28 V VCC VCC Supply Voltage 4.5 ~ 5.5 V Converter Output Voltage (external REFIN input) 0.5 ~ 2.5 V V OUT Converter Output Voltage (internal FB setting) 0.5 ~ 3.3 V IOUT Converter Output Current ~ 25 A T A Ambient Temperature -40 ~ 85 oC T J Junction Temperature -40 ~ 125 oC Note 3 : Refer to the typical application circuit. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |