MP2610 datasheet(2/16 Pages) MPS

2 / 16 page

MP2610 – 2A, 24V INPUT, 1.1MHz 1-2CELL SWITCHING LI-ION BATTERY CHARGER

MP2610 Rev. 0.91

www.MonolithicPower.com

7/13/2010

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

Free Air Temperature (TA)

MP2610ER

4mm×4mm QFN16

2610ER

-20ºC to +85ºC

* For Tape & Reel, add suffix-z (e.g. MP2610ER-Z);

For RoHS Compliant packaging, add suffix-LF (e.g. MP2610ER-LF-Z)

PACKAGE REFERENCE

TOP VIEW

PIN 1 ID

NTC

ACOK

CHGOK

VREF33

GND

CSP

BATT

COMPI

EXPOSED PAD

ON BACKSIDE

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ....................................... 26V

VSW........................................-0.3V to VIN + 0.3V

VBST ...................................................... VSW + 6V

VCSP, VBATT, ...................................-0.3V to +18V

All Other Pins..................................-0.3V to +6V

Continuous Power Dissipation

(TA=+25°C)

(2)

............................................................. 2.7W

Junction Temperature...............................150

°C

Lead Temperature ....................................260

°C

Storage Temperature............... -65

°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..............................5V to 24V

Operating Junct.Temp(TJ)........ -20°C to +125°C

Thermal Resistance

(4)

θJA

θJC

4mm×4mm QFN16 ................. 46 .......10...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX),

the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/ θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7 4-layer board.

MP2610 데이터시트(PDF) 2 Page - Monolithic Power Systems

MP2610 데이터시트(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

데이터시트 다운로드

링크 URL