MP2633 datasheet(3/33 Pages) MPS

3 / 33 page

MP2633 – 1.5A SINGLE CELL SWITCH MODE BATTERY CHARGER

MP2633 Rev. 1.05

www.MonolithicPower.com

4/19/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

MP2633GR

QFN24 (4×4mm)

M2633E

* For Tape & Reel, add suffix –Z (e.g. MP2633GR–Z);

PACKAGE REFERENCE

TOP VIEW

ABSOLUTE MAXIMUM RATINGS (1)

VIN .................................................–0.3V to 20V

SYS, SW .......................................–0.3V to 6.5V

BATT.............................................–0.3V to 6.5V

ACOK

-----------------

, CHG

-------------

, BOOST

---------------------

...................–0.3V to 6.5V

All Other Pins ................................–0.3V to 6.5V

Junction Temperature ...............................150°C

Lead Temperature ....................................260°C

Continuous Power Dissipation (TA = +25°C)

(2)

........................................................... 2.97W

Junction Temperature ...............................150°C

Operating Temperature............. –20°C to +85°C

Recommended Operating Conditions

(3)

Supply Voltage VIN............................4.5V to 6V

Battery Voltage VOUT .....................2.5V to 4.35V

Operating Junction Temp. (TJ).−40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN24 (4×4mm)..................... 42 ........9 ....°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP2633 데이터시트(PDF) 3 Page - Monolithic Power Systems

MP2633 데이터시트(HTML) 3 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

데이터시트 다운로드

링크 URL