AM29F010 datasheet(17/31 Pages) AMD

17 / 31 page

Am29F010

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +125°C

Ambient Temperature

with Power Applied . . . . . . . . . . . . . –55

°C to +125°C

Voltage with Respect to Ground

VCC (Note 1). . . . . . . . . . . . . . . . . . . .–2.0 V to +7.0 V

A9 (Note 2). . . . . . . . . . . . . . . . . . . . –2.0 V to +12.5 V

All other pins (Note 1) . . . . . . . . . . . . –2.0 V to +7.0 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pin is –0.5 V. During

voltage transitions, inputs may overshoot VSS to –2.0 V

for periods of up to 20 ns. See Figure 5. Maximum DC

voltage on input and I/O pins is VCC + 0.5 V. During volt-

age transitions, input and I/O pins may overshoot to VCC

+ 2.0 V for periods up to 20 ns. See Figure 6.

2. Minimum DC input voltage on A9 pin is –0.5 V. During

voltage transitions, A9 pins may overshoot VSS to –2.0 V

for periods of up to 20 ns. See Figure 5. Maximum DC in-

put voltage on A9 is +12.5 V which may overshoot to 13.5

V for periods up to 20 ns.

3. No more than one output shorted at a time. Duration of

the short circuit should not be greater than one second.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This is

a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the op-

erational sections of this specification is not implied. Expo-

sure of the device to absolute maximum rating conditions for

extended periods may affect device reliability.

Figure 5.

Maximum Negative Overshoot

Waveform

Figure 6.

Maximum Positive Overshoot

Waveform

OPERATING RANGES

Commercial (C) Devices

Case Temperature (TA) . . . . . . . . . . . . . 0°C to +70°C

Industrial (I) Devices

Case Temperature (TA) . . . . . . . . . . . –40°C to +85°C

Extended (E) Devices

Case Temperature (TA) . . . . . . . . . . –55°C to +125°C

VCC Supply Voltages

VCC for ±5% devices . . . . . . . . . . .+4.75 V to +5.25 V

VCC for ±10% devices . . . . . . . . . .+4.50 V to +5.50 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

16736G-11

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

16736G-12

AM29F010 데이터시트(PDF) 17 Page - Advanced Micro Devices

AM29F010 데이터시트(HTML) 17 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

데이터시트 다운로드

링크 URL