| 전자부품 데이터시트 검색엔진 |
|
PIC18F4550ESOSQTP 데이터시트(PDF) 31 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4550ESOSQTP 데이터시트(HTML) 31 Page - Microchip Technology |
|
31 / 430 page ![]() © 2007 Microchip Technology Inc. Preliminary DS39632D-page 29 PIC18F2455/2550/4455/4550 2.3 Oscillator Settings for USB When the PIC18F4550 is used for USB connectivity, it must have either a 6 MHz or 48 MHz clock for USB operation, depending on whether Low-Speed or Full-Speed mode is being used. This may require some forethought in selecting an oscillator frequency and programming the device. The full range of possible oscillator configurations compatible with USB operation is shown in Table 2-3. 2.3.1 LOW-SPEED OPERATION The USB clock for Low-Speed mode is derived from the primary oscillator chain and not directly from the PLL. It is divided by 4 to produce the actual 6 MHz clock. Because of this, the microcontroller can only use a clock frequency of 24 MHz when the USB module is active and the controller clock source is one of the primary oscillator modes (XT, HS or EC, with or without the PLL). This restriction does not apply if the microcontroller clock source is the secondary oscillator or internal oscillator block. 2.3.2 RUNNING DIFFERENT USB AND MICROCONTROLLER CLOCKS The USB module, in either mode, can run asynchro- nously with respect to the microcontroller core and other peripherals. This means that applications can use the primary oscillator for the USB clock while the micro- controller runs from a separate clock source at a lower speed. If it is necessary to run the entire application from only one clock source, full-speed operation provides a greater selection of microcontroller clock frequencies. TABLE 2-3: OSCILLATOR CONFIGURATION OPTIONS FOR USB OPERATION Input Oscillator Frequency PLL Division (PLLDIV2:PLLDIV0) Clock Mode (FOSC3:FOSC0) MCU Clock Division (CPUDIV1:CPUDIV0) Microcontroller Clock Frequency 48 MHz N/A(1) EC, ECIO None (00)48 MHz ÷2 (01) 24 MHz ÷3 (10)16 MHz ÷4 (11)12 MHz 48 MHz ÷12 (111) EC, ECIO None (00)48 MHz ÷2 (01) 24 MHz ÷3 (10)16 MHz ÷4 (11)12 MHz ECPLL, ECPIO ÷2 (00)48 MHz ÷3 (01)32 MHz ÷4 (10) 24 MHz ÷6 (11)16 MHz 40 MHz ÷10 (110) EC, ECIO None (00)40 MHz ÷2 (01)20 MHz ÷3 (10) 13.33 MHz ÷4 (11)10 MHz ECPLL, ECPIO ÷2 (00)48 MHz ÷3 (01)32 MHz ÷4 (10) 24 MHz ÷6 (11)16 MHz 24 MHz ÷6 (101) HS, EC, ECIO None (00) 24 MHz ÷2 (01)12 MHz ÷3 (10)8 MHz ÷4 (11)6 MHz HSPLL, ECPLL, ECPIO ÷2 (00)48 MHz ÷3 (01)32 MHz ÷4 (10) 24 MHz ÷6 (11)16 MHz Legend: All clock frequencies, except 24 MHz, are exclusively associated with full-speed USB operation (USB clock of 48 MHz). Bold is used to highlight clock selections that are compatible with low-speed USB operation (system clock of 24 MHz, USB clock of 6 MHz). Note 1: Only valid when the USBDIV Configuration bit is cleared. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |