ECIO28 datasheet(7/9 Pages) ETC2

7 / 9 page

ECXX-60-2

PICmicro and PIC are trademarks of Microchip Technology Inc.

ARM is a trademark of ARM plc. ECIO and E-blocks are

trademarks of Matrix Multimedia Limited.

Page 7

Matrix Multimedia Limited

Using FlowKit with ECIO

What does it do?

The FlowKit can be connected to hardware systems to

provide a real time debug facility where it is possible to

step through the Flowcode program on the PC and

step through the program in the hardware at the same

time. This function is available with Flowcode for

PICmicro V4.2 or later.

Benefits

• Helps to solve programming problems

• Seamless program and debug

Features

• Compatible with ECIO, MIAC and Formula

Flowcode systems via the USB lead

• Available for Flowcode for PICmicro V4.2 and later

• Allows start, step, and play of programs

• Allows users to see and alter variable values

Description

Whilst Flowcode simulation allows debug of a system

to a first pass, FlowKit takes debug to a new level by

running the program in the hardware and on the

screen at the same time. The system is controlled from

within the Flowcode environment where controls allow

users to start, stop, pause and step through their

program one icon at a time. Under user control the

Flowcode software shows the location of the program

in the flow chart, the value of all variables in the

program, and allows users to alter the variable values

when the program is paused.

Ordering information

FlowKit pack

HP299

The FlowKit main board

The system is controlled within Flowcode 4.2+

where the icon just executed is clearly marked

Using Flowkit with ECIO and E-blocks adaptor

board

Note that use of FlowKit with ECIO for ARM is

not currently supported.

ECIO28 데이터시트(PDF) 7 Page - List of Unclassifed Manufacturers

ECIO28 데이터시트(HTML) 7 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9

데이터시트 다운로드

링크 URL