2ASA datasheet(29/60 Pages) ETC2

29 / 60 page

Semi Flush

These blades allow a very high resistance. Will cut

malleable wires like Copper as well as hard wires.

Leaves a pinch at the end of the wire.

Flush

Allow a flat cut with high cutting capacities. The edge of

the wire is cut off almost squarely. Guaranteed precision

even after constant usage. Thanks to faster penetration

into the component the operator’s effort is substantially

reduced.

Tip Cutters

TIP CUTTERS

Tip Cutters

Erem offers the largest variety of high precision tip cut-

ters.

All edges are finely radiused to avoid board damaging.

To find the cutter for your demand just follow the steps

Angled

For standard tip cutting applications.

110 mm Small short head, for increased cutting resistance.

For almost all cutting applications.

115 mm Longer and finer head.

For cutting applications where easy access is more impor-

tant than a high cutting capacity.

120 mm Strong version.

For all cutting applications where high cutting capacity

is required.

Angled Narrow

For applications in confined areas. Longer but narrow head for

better reach between parts and into areas with limited access.

Straight

For vertical or horizontal tip cutting applications.

Head Form

Cut

Size

Safety Lead Device

1. Erem Cut

2. Others

Cutting safety device, holds wire scraps.

Can be adapted on 582E only.

Add “W” when ordering, e.g. 582EW.

Erem Blade Protection

All tip cutters have an “anti-overbite”

system which prevents blades from

overlapping.

2ASA 데이터시트(PDF) 29 Page - List of Unclassifed Manufacturers

2ASA 데이터시트(HTML) 29 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

데이터시트 다운로드

링크 URL