LM3886

www.ti.com

SNAS091C – MAY 1999 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2) (3)

(No Signal)

94V

(Input Signal)

84V

Common Mode Input Voltage

≤ 80V

60V

Output Current

Internally Limited

125W

3000V

150°C

Soldering Information

T Package (10 seconds)

260°C

Storage Temperature

−40°C to +150°C

Thermal Resistance

1°C/W

43°C/W

(1)

All voltages are measured with respect to the GND pin (pin 7), unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional. Electrical Characteristics state DC and AC electrical specifications under particular test conditions and

specific performance limits. This assumes that the device is within the Operating Ratings. The typical value is a good indication of

device performance.

(3)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(4)

−40V.

(5)

For operating at case temperatures above 25°C, the device must be derated based on a 150°C maximum junction temperature and a

thermal resistance of

CONSIDERATIONS.

(6)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

(7)

The operating junction temperature maximum is 150°C, however, the instantaneous Safe Operating Area temperature is 250°C.

Operating Ratings

(1) (2) (3)

Temperature Range

20V to 84V

(1)

All voltages are measured with respect to the GND pin (pin 7), unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional. Electrical Characteristics state DC and AC electrical specifications under particular test conditions and

specific performance limits. This assumes that the device is within the Operating Ratings. The typical value is a good indication of

device performance.

(3)

Operation is specified up to 84V, however, distortion may be introduced from SPIKe Protection Circuitry if proper thermal considerations

are not taken into account. Refer to THERMAL CONSIDERATIONS for more information. (See Figure 5)

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: LM3886