MOTION_BURST

Address: 0x63

Burst Read Register

Access: Read

Reset Value: 0x00

Bit

7

6543210

Field

MB7

MB6

MB5

MB4

MB3

MB2

MB1

MB0

Data Type: Various.

USAGE: This register is used to enable burst mode. Burst is initiated by a read of this register, which will then return

continuous data starting from the address stored in BURST_READ FIRST register through BURST_READ_LAST

register. Burst read must read the exact number of addresses set in order to complete the burst operation. For

more information refer to Burst Mode Operation section.

All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.

PixArt Imaging Inc.

PixArt Imaging Inc.

ADNS-3000 Low Power Optical Mouse Sensor