Regulatory Requirements

• Passes FCC B and worldwide analogous emission

limits when assembled into a mouse with shielded

cable and following

PixArt recommendations.

• Passes IEC-1000-4-3 radiated susceptibility level when

assembled into a mouse with shielded cable and

following

PixArt recommendations.

• Passes EN61000-4-4/IEC801-4 EFT tests when

assembled into a mouse with shielded cable and

following

PixArt recommendations.

• Provides sufficient ESD creepage/clearance distance

to avoid discharge up to 15kV when assembled into a

mouse according to usage instructions above.

Figure 3. Block diagram of ADNS-7530 integrated molded lead-frame DIP sensor

Overview of Laser Mouse Sensor Assembly

Figure 4. 2D Assembly drawing of ADNS-7530 sensor coupled with the ADNS-6150 lens, PCB and base plate (top and cross-sectional view)

Oscillator

LASER Drive

MISO

MOTION

MOSI

LASER_NEN

VCSEL+VE

XYLASER

VCSEL-VE

DGND

VDDIO

GND

VDD3

RefA

Image Array

DSP

VCSEL

Laser Mouse Sensor

SCLK

NCS

DETAIL A

Top of PCB to Surface

7.40

0.291

Lens reference plane to Tracking surface (Z)

2.40

0.094

PCB thickness

1.60

0.063

Gap between PCB and base plate

3.40

0.134

Top of sensor to surface

9.05

0.356

Die to Surface

7.83

0.308

DETAIL A

Sensor Hole

Guide Post A

VCSEL Hole

Lens

Sensor

PCB

Base Plate Foot

Base Plate

Navigation Surface

B

B

Guide post A

Guide post B

Wireless USB Optical Mouse

Pix

Art Imaging Inc

ADNS-7530 Integrated Molded Lead-Frame DIP Sensor

All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.

PixArt Imaging Inc.