www.austriamicrosystems.com/Audio/OpAmps/AS1710_12

Revision 1.9

10 - 19

AS1710/AS1712

Datasheet - Application In form atio n

8 Application Information

8.1 Package Power Dissipation

Caution:

Due to the high output current drive, this op-amp can exceed the absolute maximum power-dissipation rating. Normally, when peak

current is less than or equal to 40mA the maximum package power dissipation is not exceeded for any of the package types

offered.

The absolute maximum power-dissipation rating of each package should always be verified. (EQ 1) gives an approximation of the package

power dissipation:



(EQ 1)

Where:

Figure 21. Typical AS1710/AS1712 Single-Supply Application

Where:

For the circuit shown in Figure 21:

(EQ 3)

Where:

For the circuit shown in Figure 21:

) + (1.0V/32)/

Therefore, for the circuit in Figure 21 the package power dissipation can be calculated as:

Adding a coupling capacitor improves the package power dissipation because there is no DC current to the load, as shown in Figure 22 on

page 11.

R

+

–

R

AS1710

32



C

3.6V