| 전자부품 데이터시트 검색엔진 |
|
MCP201 데이터시트(PDF) 5 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP201 데이터시트(HTML) 5 Page - Microchip Technology |
|
5 / 40 page ![]() © 2007 Microchip Technology Inc. DS21730F-page 5 MCP201 TABLE 1-2: OVERVIEW OF OPERATIONAL MODES State Transmitter Voltage Regulator Operation Comments POR OFF OFF Read CS/WAKE. If low, then READY. If high, READY1 mode. Sample FAULT/SLPS and select slope Ready OFF ON If CS/WAKE rising edge, then Operation mode. Bus Off state Ready1 OFF ON If CS/WAKE falling edge, then READY mode. Bus Off state Operation ON ON If CS/WAKE falling edge, then Power down. Normal Operation mode Power-down OFF OFF On LIN bus falling, go to READY mode. On CS/WAKE rising edge, go to Operational mode Low-Power mode Note: After power-on, CS will not be sampled until VREG has stabized and an additional 600 µs has elapsed. The microcontroller should toggle CS approximately 1mS after RESET to ensure that CS will be recognized. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |