PIC16F84A datasheet(308/337 Pages) MICROCHIP

308 / 337 page

PIC16C6X

DS30234D-page 308

APPENDIX C: WHAT’S NEW

Added PIC16CR63 and PIC16CR65 devices.

Added

PIC16C66

and

PIC16C67

devices. The

PIC16C66/67 devices have 368 bytes of data memory

distributed in 4 banks and 8K of program memory in 4

pages. These two devices have an enhanced SPI that

supports both clock phase and polarity. The USART

has been enhanced.

When upgrading to the PIC16C66/67 please note that

the upper 16 bytes of data memory in banks 1,2, and 3

are mapped into bank 0. This may require relocation of

data memory usage in the user application code.

Q-cycles for instruction execution were added to Sec-

tion 14.0 Instruction Set Summary.

APPENDIX D: WHAT’S CHANGED

Minor changes, spelling and grammatical changes.

Divided SPI section into SPI for the PIC16C66/67

(Section 11.3)

and

SPI

for

all

other

devices

(Section 11.2).

Added the following note for the USART. This applies to

all devices except the PIC16C66 and PIC16C67.

For the PIC16C63/R63/65/65A/R65 the asynchronous

high speed mode (BRGH = 1) may experience a high

rate of receive errors. It is recommended that BRGH =

0. If you desire a higher baud rate than BRGH = 0 can

support, refer to the device errata for additional infor-

mation or use the PIC16C66/67.

PIC16F84A 데이터시트(PDF) 308 Page - Microchip Technology