LPC2131_32_34_36_38

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2011. All rights reserved.

Product data sheet

Rev. 5.1 — 29 July 2011

26 of 45

NXP Semiconductors

LPC2131/32/34/36/38

Single-chip 16/32-bit microcontrollers

7.

Limiting values

[1]

The following applies to the Limiting values:

a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive

static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated

maximum.

otherwise noted.

[2]

Including voltage on outputs in 3-state mode.

[3]

Not to exceed 4.6 V.

[4]

The peak current is limited to 25 times the corresponding maximum current.

[5]

Dependent on package type.

[6]

Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k

 series resistor.

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).[1]

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage (core and external rail)

0.5

+3.6

V

analog 3.3 V pad supply voltage

0.5

+4.6

V

input voltage on pin VBAT

for the RTC

0.5

+4.6

V

input voltage on pin VREF

0.5

+4.6

V

analog input voltage

on ADC related

pins

0.5

+5.1

V

input voltage

5 V tolerant I/O

pins; only valid

supply voltage is

present

[2]

0.5

+6.0

V

other I/O pins

[2][3]

0.5

V

supply current

per supply pin

[4] -100

mA

ground current

per ground pin

[4] -100

mA

sink current

T = 85

C

-20

mA

storage temperature

[5]

40

+125

C

total power dissipation (per package)

based on package

heat transfer, not

device power

consumption

-1.5

W

electrostatic discharge voltage

human body model

[6]

all pins

4000

+4000

V