RX210B

Renesas Starter Kit Sample Code for CubeSuite+

R20AN0273EJ0100 Rev. 1.00

Page 2 of 6

Jan. 17, 2014

1.

Installing CubeSuite+

If you have not installed CubeSuite+, download the latest version of CubeSuite+ for installation from the link below.

http://www.renesas.com/cubesuite+_download

2.

Starting the CubeSuite+ Project

Select the file below by double-clicking on its name (shown below) or clicking on the [GO] button in the [Open

Existing Project] area in the start panel of CubeSuite+.

<Folder where the sample code was unzipped>\ an_r20an0273je0100_rx210b_rsk \210brsk\210BRSK\210BRSK.mtpj

3.

Selecting a Sub-Project (When Using the Sample Code)

The sample code is provided in sub-projects for individual tutorials and peripheral functions.

After starting the project, the next step is to make the sub-project for the tutorial or peripheral function you would like

to use active in accord with the steps shown below.

3.1

How to Make a Sub-Project Active

Select the sub-project for a tutorial or peripheral function you would like to use from the Project Tree and right-click on

it to open the context menu. Then, select [Set sub as Active Project].

The name of the active sub-project is underlined in the Project Tree.

Active Project