THS4081, THS4082

175MHz LOW POWER HIGHSPEED AMPLIFIERS

SLOS274D − DECEMBER 1999 − REVISED JUNE 2001

3

POST OFFICE BOX 655303

±16.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±4 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I-suffix

−40

°C to 85°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

300

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

DISSIPATION RATING TABLE

PACKAGE

θJA

θJC

TA = 25°C

PACKAGE

θJA

(

°C/W)

θJC

(

°C/W)

TA = 25 C

POWER RATING

D

167‡

38.3

740 mW

DGN§

58.4

4.7

2.14 W

‡ This data was taken using the JEDEC standard Low-K test PCB. For the JEDEC Proposed

High-K test PCB, the

θJA is 95°C/W with a power rating at TA = 25°C of 1.32 W.

§ This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. × 3 in.

PC. For further information, refer to Application Information section of this data sheet.

recommended operating conditions

MIN

NOM

MAX

UNIT

Supply voltage, VCC+ and VCC−

Dual supply

±5

±15

V

Supply voltage, VCC+ and VCC−

Single supply

10

30

V

Operating free-air temperature, TA

C-suffix

0

70

°C

Operating free-air temperature, TA

I-suffix

−40

85

°C