ICS542

CLOCK DIVIDER

CLOCK DIVIDER

IDT™ / ICS™ CLOCK DIVIDER

3

ICS542

REV J 051310

same side of the board, minimizing vias through other signal

layers (the ferrite bead and bulk decoupling capacitor can be

mounted on the back). Other signal traces should be routed

away from the ICS542. This includes signal traces just

underneath the device, or on layers adjacent to the ground

plane layer used by the device.

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the ICS542. These ratings, which are

standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these

or any other conditions above those indicated in the operational sections of the specifications is not implied.

Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical

parameters are guaranteed only over the recommended operating temperature range.

Recommended Operation Conditions

Item

Rating

Supply Voltage, VDD

7 V

All Inputs and Outputs

-0.5 V to VDD+0.5 V

Ambient Operating Temperature (commercial)

0 to +70

° C

Ambient Operating Temperature (industrial)

-40 to +85

° C

Storage Temperature

-65 to +150

° C

Junction Temperature

125

° C

Soldering Temperature

260

° C

Parameter

Min.

Typ.

Max.

Units

Ambient Operating Temperature (commercial)

0

+70

° C

Ambient Operating Temperature (industrial)

-40

+85

° C

Power Supply Voltage (measured in respect to GND)

3.0

5.5

V