12

* This specification are subject to be changed without notice.

EM73880

EM73880

EM73880

EM73880

EM73880

4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

11.30.2001

Preliminary

Preliminary

Preliminary

Preliminary

Preliminary

HL REGISTER FUNCTION

HL REGISTER FUNCTION

HL REGISTER FUNCTION

HL REGISTER FUNCTION

HL REGISTER FUNCTION

(1) For instruction : LDL #k, LDH #k, THA, THL, INCL, DECL, EXAL, EXAH, HL register used as a

temporary register .

LDL #05h;

LDH #0Dh;

(2) For instruction LDAM, STAM, STAMI .., HL register used as a pointer for the address of RAM memory.

PROGRAM EXAMPLE: Store immediate data #Ah into RAM of address 35h.

LDL #5h;

LDH #3h;

STDMI #0Ah; RAM[35]

← Ah

(3) For instruction : SELP, CLPL, TFPL, L regieter be a pointer to indicate the bit of I/O port.

When LR = 0 indicate P4.0

PROGRAM EXAMPLE: To set bit 0 of Port4 to "1"

LDL #00h;

SEPL ; P4.0

← 1

STACK POINTER (SP)

STACK POINTER (SP)

STACK POINTER (SP)

STACK POINTER (SP)

STACK POINTER (SP)

Stack pointer is a 4-bit register which stores the present stack level number.

Before using stack, user must set the SP value first, CPU will not initiate the SP value after reset condition

. When a new subroutine is accepted, the SP will be decreased one automatically, in another word, if

returning from a subroutine, the SP will be increased one .

The data transfer between ACC and SP is by instruction of "LDASP" and "STASP".

DATA POINTER (DP)

DATA POINTER (DP)

DATA POINTER (DP)

DATA POINTER (DP)

DATA POINTER (DP)

Data pointer is a 12-bit register which stores the address of ROM can indicate the ROM code data

specified by user (refer to data ROM).

CLOCK AND TIMING GENERATOR

CLOCK AND TIMING GENERATOR

CLOCK AND TIMING GENERATOR

CLOCK AND TIMING GENERATOR

CLOCK AND TIMING GENERATOR

The clock generator is supported by a dual clock system, the slow clock source comes from crystal

(resonator) or RC oscillation is decided by mask option, and it's 32.768 KHz. The high freq OSC is built by

a internal clock source that will be 4.6 MHz.

CLOCK GENERATOR STRUCTURE

CLOCK GENERATOR STRUCTURE

CLOCK GENERATOR STRUCTURE

CLOCK GENERATOR STRUCTURE

CLOCK GENERATOR STRUCTURE

There are two clock generator for system clock control. P14 is the status register for the CPU status. P16,

P19 and P22 are the system clock mode control ports.