REV. B

–10–

ADG528A/ADG529A

TERMINOLOGY

Ohmic resistance between terminals D and S

Difference between the RON of any two channels

Change in RON versus temperature

Source terminal leakage current when the switch

is off.

Drain terminal leakage current when the switch is

off.

Leakage current that flows from the closed switch

into the body.

Channel input capacitance for “OFF” condition

Channel output capacitance for “OFF” condition

Digital input capacitance

Delay time between the 50% and 90% points of

the digital input and switch “ON” condition.

Delay time between the 50% and 10% points of

the digital input and switch “OFF” condition

Delay time between the 50% and 90% points of

the digital inputs and switch “ON” condition

when switching from one address state to another.

“OFF” time measured between 50% points of

both switches when switching from one address

state to another

Maximum input voltage for Logic “0”

Minimum input voltage for Logic “1”

Input current of the digital input

Most positive voltage supply

Most negative voltage supply

Positive supply current

Negative supply current

OUTLINE DIMENSIONS

18-Lead Plastic Dual In-Line Package [PDIP]

(N-18)

Dimensions shown in inches and (millimeters)

SEATING

PLANE

0.015 (0.38) MIN

0.180 (4.57)

MAX

0.022 (0.558)

0.014 (0.356)

0.150 (3.81)

0.110 (2.79)

0.100

(2.54)

BSC

0.060 (1.52)

0.045 (1.14)

18

1

9

10

0.885 (22.48)

0.845 (21.46)

0.295 (7.49)

0.275 (6.99)

0.015 (0.381)

0.008 (0.203)

0.325 (8.26)

0.300 (7.62)

CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS

(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR

REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN

COMPLIANT TO JEDEC STANDARDS MO-095AD

0.180 (4.57)

MAX

20-Lead Plastic Leaded Chip Carrier [PLCC]

(P-20A)

Dimensions shown in inches and (millimeters)

0.020 (0.50)

R

BOTTOM

VIEW

(PINS UP)

0.021 (0.53)

0.013 (0.33)

0.330 (8.38)

0.290 (7.37)

0.032 (0.81)

0.026 (0.66)

0.056 (1.42)

0.042 (1.07)

0.20 (0.51)

MIN

0.120 (3.04)

0.090 (2.29)

3

4

19

18

8

9

14

13

TOP VIEW

(PINS DOWN)

0.395 (10.02)

0.385 (9.78)

SQ

0.356 (9.04)

0.350 (8.89)

SQ

0.048 (1.21)

0.042 (1.07)

0.048 (1.21)

0.042 (1.07)

0.020

(0.50)

R

0.050

(1.27)

BSC

0.180 (4.57)

0.165 (4.19)

0.040 (1.01)

0.025 (0.64)

R

COMPLIANT TO JEDEC STANDARDS MO-047AA

CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS

(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR

REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN