Data Sheet

LIN Characteristics

Bus Setup Options

Characteristic

Description

Source

Analog channels 1-4

Digital channels D0-D15 (MSO models only)

Thresholds

Per-channel thresholds

Recommended

Probing

Single Ended

Sample Point

Position at 5% to 95% within bit period or unit interval

Decode Configuration

Polarity

Normal or Inverted

Bit rate

Pre-defined list

of rates

1.2 Kb/s - 19.2 Kb/s

Custom

800 b/s - 100 Kb/s

LIN standard

v1.x, v2.x, or Both

Include parity bits

with ID

Yes or No

Formats Available

Decimal: ID and Parity; Hex: Data and Checksum

Binary

Display Modes

Bus

Bus only

Bus and

Waveforms

Simultaneous display of bus and digital waveforms

Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or

Search On

Sync

Identifier

Data (number of bytes 1-8; trigger or search when =, ≠,<,>,

≤, ≥, inside range, outside range)

ID and Data

Wakeup Frame

Sleep Frame

Error (Sync, ID Parity, Checksum)

Bus Decode

Characteristic

Description

Maximum Bit Rate

Up to 1 Mb/s, by LIN definition up to 20 Kb/s (for automated

decoding of bus)

Decode Display

Start (green bracket)

Sync, Break (purple box)

Identifier, Parity (yellow box)

Data (cyan box)

Checksum, Wakeup (purple box)

End of frame (red bracket)

Errors (red box)

-Sync

-Parity

- Checksum

- Header Time

- Response Time

- Frame Time

- Response and Frame Time

LIN bus setup, showing source configuration options for LIN bus.

Triggering on a Sync Error on the LIN bus.

Event table for LIN bus with all captured packets time stamped and in a tabular view.