전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

Preview PDF HTML

ML9058E 데이터시트(PDF) 44 Page - List of Unclassifed Manufacturers

부품명 ML9058E
상세설명  132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays
PDF  76 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  ETC2 [List of Unclassifed Manufacturers]
홈페이지  
Logo ETC2 - List of Unclassifed Manufacturers

ML9058E 데이터시트(HTML) 44 Page - List of Unclassifed Manufacturers

Back Button ML9058E Datasheet HTML 40Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 41Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 42Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 43Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 44Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 45Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 46Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 47Page - List of Unclassifed Manufacturers ML9058E Datasheet HTML 48Page - List of Unclassifed Manufacturers Next Button
Zoom Inzoom in Zoom Outzoom out
 44 / 76 page
background image
FEDL9058E-01
LAPIS Semiconductor
ML9058E
44/76
Status Read (Read)
A0
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
0
BUSY
ADC
ON/OFF
RESET
*
*
*
*
*: Invalid data
BUSY
When BUSY is '1', it indicates that the internal operations are being made or the LSI is
being reset. Although no command is accepted until BUSY becomes '0', there is no
need to check this bit if the cycle time can be satisfied.
ADC
This bit indicates the relationship between the column address and the segment driver.
0: Reverse (SEG131
 SEG0); column address 0(H)  83(H)
1: Forward (SEG0
 SEG131); column address 0(H)  83(H)
(Opposite to the polarity of the ADC command.)
ON/OFF
This bit indicates the ON/OFF state of the display. (Opposite to the polarity of the
display ON/OFF command.)
0: Display ON
1: Display OFF
RESET
This bit indicates that the LSI is being reset due to the RES signal or the reset
command.
0: Operating state
1: Being reset
Display Data Write (Write)
This command writes an 8-bit data at the specified address of the display data RAM. Since the column address is
automatically incremented (by +1) after writing the data, the MPU can write successive display data to the display
data RAM.
A0
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
1
Write data
Display Data Read (Read)
This command read the 8-bit data from the specified address of the display data RAM. Since the column address is
automatically incremented (by +1) after reading the data, the MPU can read successive display data from the
display data RAM. Further, one dummy read operation is necessary immediately after setting the column data.
The display data cannot be read out when the serial interface is being used.
A0
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
1
Read data



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com