ICS1887M datasheet(5/14 Pages) ICST

5 / 14 page

ICS1887

This note describes the issues involved in re-

placing the AMD PDR & PDT with the

ICS1887.

There are a number of implementation differ-

ences between AMD’s PDR & PDT and the

ICS1887. This note describes the differences

and how they affect an application.

Signal Detect

Many twisted pair and fiber optic transceivers

provide a signal detect indication that becomes

active when the amount of energy being re-

ceived reaches a threshold that makes it appear

to be data and not ambient noise.

The AMD PDR device has a single ended

PECL input (SDI) and provides a TTL level

output (SDO) that tracks the input. The input

controls the source that the PLL locks to. When

signal detect is asserted, the PLL locks to the

incoming receive data. When signal detect is

deasserted, the PLL locks to the LSCLK input

to prevent locking to an off center frequency.

The current ICS1887 device provides a single

TTL-compatible input, carrier detect (CD~).

When carrier detect is asserted, the ICS1887

locks to the incoming receive data. When car-

rier detect is deasserted, or if carrier detect is

asserted and no data is present on the receive

inputs, the PLL will free run and continue to

provide RXCLK at the nominal 25 MHz

frequency. This allows the carrier detect input

to always be tied to an asserted level (ground).

If a true signal detect is required by a chip that

connects to the ICS1887, a simple, low cost

PECL to CMOS converter can be used. The

following circuit implements this function:

Substituting the ICS1887

for the AMD PDR & PDT

Option 2

Single-Ended PECL to CMOS Conversion Circuit

CD PECL Input: Board Layout Options

Option 1

Differential PECL to CMOS Conversion Circuit

ICS1887M 데이터시트(PDF) 5 Page - Integrated Circuit Systems

ICS1887M 데이터시트(HTML) 5 Page - Integrated Circuit Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

데이터시트 다운로드

링크 URL