83C196EA datasheet(21/40 Pages) INTEL

21 / 40 page

ADVANCE INFORMATION

83C196EA CHMOS 16-BIT MICROCONTROLLER — AUTOMOTIVE

6.0

ELECTRICAL CHARACTERISTICS

6.1

DC Characteristics

ABSOLUTE MAXIMUM RATINGS†

Storage Temperature .................................. –60°C to +150°C

Supply Voltage with Respect to V

SS ............... –0.5 V to +7.0 V

Power Dissipation .......................................................... 1.5 W

OPERATING CONDITIONS†

C (Case Temperature Under Bias) .............. –40°C to +125°C

CC (Digital Supply Voltage) .............................. 4.5 V to 5.5 V

REF (Analog Supply Voltage) ........................... 4.5 V to 5.5 V

XTAL

1 (Input frequency for VCC = 4.5 V – 5.5 V)

(Note 1) ................................................ 20 MHz to 40 MHz

NOTE:

This device is static and should operate below

1 Hz, but has been tested only down to 20 MHz.

NOTICE: This document contains information on

products in the design phase of development. The

specifications are subject to change without notice.

Verify with your local Intel sales office that you

have the latest datasheet before finalizing a

design.

†WARNING: Stressing the device beyond the

“Absolute Maximum Ratings” may cause perma-

nent damage. These are stress ratings only. Oper-

ation beyond the “Operating Conditions” is not

recommended and extended exposure beyond the

“Operating Conditions” may affect device

reliability.

Table 6. DC Characteristics at V

CC = 4.5 V – 5.5 V

Symbol

Parameter

Min

Typical

(Note 1)

Max

Units

Test

Conditions

CC supply current

120

135

XTAL1 = 40 MHz

CC = 5.5 V

Device in Reset

IDLE

Idle mode current

XTAL1 = 40 MHz

CC = 5.5 V

Powerdown mode current

µA

CC = 5.5 V

REF

A/D reference supply current

TBD

XTAL1 = 40 MHz

CC = VREF = 5.5 V

Device in Reset

INJD

Maximum injection current per

port on bidirectional pins

(Note 4)

–10

Input leakage current

(Standard inputs except

analog inputs)

–10

µA

SS < VIN < VCC

NOTES:

Typical values are based on a limited number of samples and are not guaranteed. The values listed

are at room temperature with V

CC = 5.0 V.

For P2.7:0, P3.7:0, P4.7:0, P5.7:0, P6.7:0, P10.3:0, P11.7:0, P12.4:0, AD15:0, EA#, RESET#,

PLLEN, NMI, TDI, TCLK, ONCE#, and XTAL1.

For P7.7:0, P8.7:0, P9.7:0, and P10.5:4.

The maximum injection current is not tested. The device is designed to meet this specification.

Pin capacitance is not tested. This value is based on design simulations.

83C196EA 데이터시트(PDF) 21 Page - Intel Corporation

83C196EA 데이터시트(HTML) 21 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

데이터시트 다운로드

링크 URL