number of additional servers over IP

UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, timed inverter shutoff, activate self-test and output power control

NEMA 5-20P input plug/6 x NEMA 5-15R and 1 x NEMA L5-20R output receptacles

Front panel LEDs provide current monitoring, voltage regulation, battery charge level, and battery warning information

UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required

$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

2200

Output kVA Capacity (kVA)

2.2

Output Watt Capacity (Watts)

1600

Output kW Capacity (kW)

1.6

Power Factor

0.7

Nominal Output Voltage(s)

Supported

120V

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line

Mode)

-18% / +8%

Output Voltage Regulation (Battery

Mode)

+/- 5%

Output Receptacles

(6) 5-15/20R; (1) L5-20R

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

INPUT

Rated input current (Maximum Load)

14.8A

Nominal Input Voltage(s) Supported

120V AC

UPS Input Connection Type

5-20P

Input Circuit Breakers

20A

UPS Input Cord Length (ft.)

10

UPS Input Cord Length (m)

3

Recommended Electrical Service

20A 120V

Input Phase

Single-Phase

BATTERY

2 / 5