| 전자부품 데이터시트 검색엔진 |
|
UPD16835 데이터시트(PDF) 1 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD16835 데이터시트(HTML) 1 Page - NEC |
|
1 / 32 page ![]() DATA SHEET MOS INTEGRATED CIRCUIT µPD16835 The information in this document is subject to change without notice. MONOLITHIC QUAD H BRIDGE DRIVER CIRCUIT The µPD16835 is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET output circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional driver ICs that use bipolar transistors. Because the µPD16835 controls a motor by inputting serial data, its package has been shrunk and the number of pins reduced. As a result, the performance of the application set can be improved and the size of the set has been reduced. This IC employs a current-controlled 64-step micro step driving method that drives stepper motor with low vibration. The µPD16835 is housed in a 38-pin shrink SOP to contribute to the miniaturization of the application set. This IC can simultaneously drive two stepper motors and is ideal for the mechanisms of camcorders. FEATURES • Four H bridge circuits employing power MOS FETs • Current-controlled 64-step micro step driving • Motor control by serial data (8 bytes × 8 bits) (original oscillation: 4-MHz input) Data is input with the LSB first. EVR reference setting voltage: 100 to 250 mV (@VREF = 250 mV) ... 4-bit data input (10-mV step) Chopping frequency: 32 to 124 kHz ... 5-bit data input (4-kHz step) Original oscillation division or internal oscillation selectable Number of pulses in 1 VD: 0 to 252 pulses ... 6 bits + 2-bit data input (4 pulses/step) Step cycle: 0.25 to 8,191.75 µs ... 15-bit data input (0.25-µs step) • 3-V power supply. Minimum operating voltage: 2.7 V (MIN.) • Low current consumption IDD: 3 mA (MAX.), IDD (reset): 100 µA (MAX.), IMO: 1 µA (MAX.) • 38-pin shrink SOP (300 mil) ABSOLUTE MAXIMUM RATINGS (TA = 25 °C) Parameter Symbol Condition Rating Unit Supply voltage VDD -0.5 to +6.0 V VM -0.5 to +11.2 V Input voltage VIN -0.5 to VDD + 0.5 V Reference voltage VREF 500 mV H bridge drive currentNote 1 IM (DC) DC ±150 mA/phase Instantaneous H bridge drive currentNote 1 IM (pulse) PW ≤ 10 ms, Duty ≤ 5% ±300 mA/phase Power consumptionNote 2 PT 1.0 W Peak junction temperature TCH (MAX) 150 °C Storage temperature Tstg -55 to +150 °C Notes 1. Permissible current per phase with the IC mounted on a PCB. 2. When the IC is mounted on a glass epoxy PCB (10 cm × 10 cm × 1 mm). Document No. G11594EJ1V0DS00 (1st edition) Date Published August 1998 J CP(K) Printed in Japan © 1998 |
유사한 부품 번호 - UPD16835 |
|
유사한 설명 - UPD16835 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |