2-Port DVI over Cat5/Cat6 Extender Splitter, Video

Transmitter, 1920x1080 at 60Hz

MODEL NUMBER: B140-002

Description

The B140-002 transmits a DVI-D Single-Link signal to two monitors up to 200 ft. away using a single Cat5e/6

patch cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable (Tripp Lite's

N202-Series). The B140-002 is compatible with all operating systems, and is plug and play, with no software or

drivers required. It also comes with mounting hardware that allows it to be wallmounted, rackmounted, or

pole-mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect the B140-002 transmitter to a DVI source using a Tripp Lite P561-Series DVI

cable (not included). Connect a Tripp Lite B140-series receiver (not included) to each display using a Tripp Lite

P561-Series DVI cable (not included). Finally, each remote receiver is connected to an RJ45 port on the

B140-002 using a single Cat5e/6 cable.

For longer extension distances, use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @

60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft..

For shorter extension distances, use a B140-1P0 or B140-1P0-WP passive receiver unit to extend a 1920 x 1080

@ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft..

Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote

units (three repeaters and one active receiver) to each channel of the B140-002, for a total of 4 displays per

channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended

up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended

up to 175 ft.

Features

Transmit a DVI-D Single-Link signal to two monitors up to 200 ft. away using a single Cat5e/6 patch cable

Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz

Highlights

Supports DVI-D Single-Link video

resolutions up to 1920 x 1080 @

60Hz

For longer distances - Use a

B140-1A0 or B140-1A0-WP

active receiver unit to extend a

1920 x 1080 @ 60Hz signal up to

150 ft., or a 1024 x 768 @ 60Hz

signal up to 200 ft.

For shorter distances - Use a

B140-1P0 or B140-1P0-WP-1

passive receiver unit to extend a

1920 x 1080 @ 60Hz signal up to

50 ft., or a 1024 x 768 @ 60Hz

signal up to 100 ft.

Use 24AWG, Solid Wire Cat5e/6

cable, such as Tripp Lite's

N202-Series, to achieve

maximum distance and resolution

Can further expand the range

and number of monitors by

adding B140-110 repeaters

Compatible with all operating

systems

Plug and play, no software or

drivers required

Compliant with the Federal Trade

Agreements Act (TAA) for GSA

Schedule purchases

Package Includes

B140-002 DVI Over Cat5

Extender/Splitter, 2-Port Local

Transmitter Unit

Mounting hardware

External power supply (Input:

100-240V, 50/60Hz, 0.5A Output:

5V, 2A)

Owner's Manual

1 / 3