UM1627 datasheet(22/38 Pages) STMICROELECTRONICS

22 / 38 page

API specification

UM1627

22/38

DocID024497 Rev 2

Troubleshooting

None.

Comments

This function resumes one operation if there is any operation is suspended. For instance, if

a program operation is in suspended state, it is resumed. If an erase operation is in

suspended state, it is resumed too. If an erase-suspended program operation is in

suspended state, the program operation is resumed prior to resuming the erase operation. It

is better to call this function based on suspendFlag returned from ‘FlashSupend()’.

Following table defines and describes various resume states and associated resume codes.

Assumptions

It assumes that the Flash block is initialized using a ‘FlashInit()’ API.

2.6.9

GetLock()

Description

This function checks the block locking status of Shadow/Low/Middle/High address spaces in

the C90LC module.

Prototype

UINT32 GetLock (PSSD_CONFIG pSSDConfig,

UINT8 blkLockIndicator,

BOOL *blkLockEnabled,

UINT32 *blkLockState);

Arguments

Table 31. resumeState definitions

Code Name

Value

Description

RES_NOTHING

No program/erase operation to be resumed

RES_PGM

A program operation is resumed

RES_ERS

A erase operation is resumed

RES_ERS_PGM

A suspended erase-suspended program operation is resumed

Table 32. Arguments for GetLock()

Argument

Description

Range

pSSDConfig

Pointer to the SSD

Configuration Structure.

The values in this structure are chip-dependent.

Please refer to Section 2.3 for more details.

blkLockIndicator

Indicating the address

space and the block locking

level, which determines the

address space block locking

Refer to Table 35 for valid values for this

parameter.

UM1627 데이터시트(PDF) 22 Page - STMicroelectronics

UM1627 데이터시트(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

데이터시트 다운로드

링크 URL