AN4444 datasheet(13/68 Pages) STMICROELECTRONICS

부품명	AN4444

상세설명	ST7590 PRIME compliant power line networking SoC design guide

PDF	68 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

13 / 68 page

DocID025925 Rev 2

13/68

AN4444

Evaluating with PRIME GUI

6.2

Loading the STM32 FW

Our EVALKITST7590-Q1 + PRIME GUI environment allow the evaluation of both PRIME

base node and PRIME service node. The STM32 on-board has to be loaded with a proper

FW based on the PRIME node type to be evaluated:



PRIME service node: “PC BRIDGE SN” FW



PRIME base node:

“UART bypass” BN FW

STM32 programming can be done using the ST-LINK or ST-LINK/V2 in-circuit

debuggers/programmers and the STM32 ST-LINK Utility software. For further details visit

www.st.com.

6.3

Connection procedure

The following procedure is required for every node to be connected:

Verify that the JP7 and JP8 strips are connected as reported in Figure 6

Connect the EVALKITST7590-Q1 to the PC using a mini-USB cable

Plug a power cable into the board AC power connector

Plug the power cable into the power socket

The “STMicroelectronics Virtual COM Port” is recognized by the PC “Device Manager”.

AN4444 데이터시트(PDF) 13 Page - STMicroelectronics