UM0932 datasheet(33/43 Pages) STMICROELECTRONICS

33 / 43 page

DocID17385 Rev 3

33/43

UM0932

Host interface

3.3.22

SS_SnifferIndication (5Eh)

This command is sent by the ST7580 after a reception of a power line frame that couldn't be

decrypted through the key value stored in the MIB object SS_Key 02h (Section 4.2.3) and it

exports the SS_Sniffer indication service (Section 2.4). The command notification occurs if

the modem is set for receiving SS frames at MIB object Modem Config 00h (Section 4.2.1),

as in the diagram flow in Figure 5.

The IndicationData fields are the same as for PHY_DataIndication (Table 39). The payload

field won't present the wrong CRC bytes.

3.3.23

CMD_SyntaxError (36h)

This command is sent by the ST758 to the external host after receiving a local frame with

the value declared in command code not corresponding to any command listed in Table 10.

Table 49. SS_SnifferIndication: Syntax

Source

Command(Args)

Possible response

ST7580

SS_SnifferIndication (IndicationData)

None

Table 50. CMD_SyntaxError: Syntax

Source

Command(Args)

Possible response

ST7580

CMD_SyntaxError(ErrorData)

None

Table 51. CMD_SyntaxError:ErrorData

Byte index

Label

Description

ERROR Wrong command code declared in the previous local frame by external host

UM0932 데이터시트(PDF) 33 Page - STMicroelectronics