UM0723 datasheet(20/48 Pages) STMICROELECTRONICS

20 / 48 page

Board description

UM0723

20/48

Doc ID 15870 Rev 4

values, must be converted to be compatible with the single positive input of the

microcontroller A/D converter used to read the current value. This means that the op amp

must be polarized in order to obtain a voltage on the output that makes it possible to

measure the symmetrical alternating input signal.

The op amp is used in follower mode with the gain of the op amp set by resistor r and R:

Equation 2

It is possible to calculate the voltage on the output of the op amp, OP OUT - VOUT, as the

sum of a bias, VBIAS, and a signal, VSIGN, component equal to:

Equation 3

Total gain of the circuit including the resistors’ divider is equal to:

Equation 4

with the default values this gives:

●

VBIAS = 1.7 V

●

G = 4.3

●

GTOT = 1.7

●

Maximum current amplifiable without distortion is 6.5 A.

Please observe that the user can modify the max. current value by changing the values of

the shunt resistors.

------------

OU T

SIGN

BIAS

BI AS

3.3

--------

⎝⎠

⎛⎞

----------------------------------------------------------

SIGN

SHUNT

--------

⎝⎠

⎛⎞

----------------------------------------------------------

TOT

SI GN

----------------

SI GN

SHUN T

-----------------------------

UM0723 데이터시트(PDF) 20 Page - STMicroelectronics

UM0723 데이터시트(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

데이터시트 다운로드

링크 URL