AN3224 datasheet(31/49 Pages) STMICROELECTRONICS

부품명	AN3224

상세설명	Developing an application allowing PR101-USB and MR101-USB FEIG readers to communicate with M24LRXX transponders

PDF	49 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

31 / 49 page

AN3224

RF ISO 15693 High-level commands

Doc ID 17559 Rev 2

31/49

5.3

RF ISO 15693 High-level RESET TO READY command

To issue an RF ISO 15693 High-level RESET TO READY command, send the

FEISC_0xB0_ISOCmd

function with the strReqData set to ‘0026’ (RESET TO READY

request).

Below is an example of code in Visual Basic and C/C++.

5.3.1

RESET TO READY command

Visual Basic source code example

Private Function cmd_ResetToReadyRF_FEIG() As Boolean

Dim strReqData As String

Dim lngReqDataLen As Long

Dim lngRspLength As Long

Dim strRespData As String * 512

Dim lngRespDataLen As Long

Dim lngStatus As Long

' Reset to Ready request Host mode : 0x2600

strReqData = "2600"

lngReqDataLen = Len(strReqData)

' FEIG USB INVENTORY request in Host Mode

lngStatus = FEISC_0xB0_ISOCmd(lngAttachedDeviceHandle(0), &HFF, _

strReqData, lngReqDataLen, _

strRespData, lngRespDataLen, _

' RF INVENTORY REQUEST RESULT

' if(lngStatus = 0) then PASS else FAIL

' if (lngRespDataLen = 0) then No transponder answer

' else strRespData contains the transponder(s) answer(s)

If (lngRespDataLen = 0) Then

cmd_ResetToReadyRF_FEIG = False

Else

cmd_ResetToReadyRF_FEIG = True

End If

End Function

AN3224 데이터시트(PDF) 31 Page - STMicroelectronics