AN3992

Application setup

Doc ID 022369 Rev 3

13/22

An ST-LINK V2 is integrated on the board as an embedded in-circuit debugger and

programmer for the STM8 MCU.

Important note

The STM8L1528_EVAL is delivered with an STM8L152M8T6 device and the firmware

designed for STM8L162M8T6. Both chips are pin-to-pin compatible but only the STM8L162

includes the AES hardware.

4.2

CR95HF plug board

The PLUG-CR95HF-B is a board which includes a CR95HF device and a matched antenna.

A host configured as a master can communicate with CR95HF through the SPI bus.

The PLUG-CR95HF-B is powered through the VPS pin and no external power supply is

required. It includes a CR95HF contactless transceiver, a 47 x 34 mm 13.56 MHz inductive

etched antenna and its associated tuning components.

Figure 7.

PLUG-CR95HF-B Board I/Os

CR95HF IRQ_OUT

NSS

MOSI

VPS & VPS_TX

CR95HF IRQ_IN

MISO

SCK

GND