PM0214 datasheet(122/245 Pages) STMICROELECTRONICS

122 / 245 page

The STM32 Cortex-M4 instruction set

PM0214

122/245

DocID022708 Rev 4

SMULTB

R0, R4, R5 ; Multiplies the top halfword of R4 with the bottom

; halfword of R5, multiplies results and writes to R0

SMULWT

R4, R5, R3 ; Multiplies R5 with the top halfword of R3,

; extracts top 32 bits and writes to R4

SMULWB

R4, R5, R3 ; Multiplies R5 with the bottom halfword of R3,

; extracts top 32 bits and writes to R4.

3.6.11

UMULL, UMLAL, SMULL, and SMLAL

Signed and Unsigned long multiply, with optional Accumulate, using 32-bit operands and

producing a 64-bit result.

Syntax

op{cond} RdLo, RdHi, Rn, Rm

where:

•

op’ is one of:

UMULL: Unsigned long multiply.

UMLAL: Unsigned long multiply, with accumulate.

SMULL: Signed long multiply.

SMLAL: Signed long multiply, with accumulate.

•

‘cond’ is an optional condition code (see Conditional execution on page 64)

•

‘RdHi, RdLo’ are the destination registers. For UMLAL and SMLAL they also hold the

accumulating value.

•

‘Rn’, ‘Rm’ are registers holding the operands

Operation

The UMULL instruction interprets the values from Rn and Rm as unsigned integers. It

multiplies these integers and places the least significant 32 bits of the result in RdLo, and

the most significant 32 bits of the result in RdHi.

The UMLAL instruction interprets the values from Rn and Rm as unsigned integers. It

multiplies these integers, adds the 64-bit result to the 64-bit unsigned integer contained in

RdHi and RdLo, and writes the result back to RdHi and RdLo.

The SMULL instruction interprets the values from Rn and Rm as two’s complement signed

integers. It multiplies these integers and places the least significant 32 bits of the result in

RdLo, and the most significant 32 bits of the result in RdHi.

The SMLAL instruction interprets the values from Rn and Rm as two’s complement signed

integers. It multiplies these integers, adds the 64-bit result to the 64-bit signed integer

contained in RdHi and RdLo, and writes the result back to RdHi and RdLo.

Restrictions

In these instructions:

•

Do not use SP or PC

•

RdHi and RdLo must be different registers.

Condition flags

These instructions do not affect the condition code flags.

PM0214 데이터시트(PDF) 122 Page - STMicroelectronics

PM0214 데이터시트(HTML) 122 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL