UM1865 datasheet(45/132 Pages) STMICROELECTRONICS

45 / 132 page

DocID027514 Rev 1

45/132

UM1865

Vendor specific commands

132

4.3.23

Aci_Gap_Allow_Rebond

Description:

This command should be given by the application when it receives the

EVT_BLUE_BOND_LOST if it wants the re-bonding to happen successfully. If this

command is not given on receiving the event, the bonding procedure will timeout.

Event(s) generated:

The controller will generate a command complete event on the completion of the command.

Even if the command is given when it is not valid, success will be returned but internally it

will have no effect.

4.3.24

Aci_Gap_Start_Limited_Discovery_Proc

Description:

Start the limited discovery procedure. The controller is commanded to start active scanning.

When this procedure is started, only the devices in limited discoverable mode are returned

to the upper layers.

Table 74. Aci_Gap_Allow_Rebond

Command name

Parameters

Return

Aci_Gap_Allow_Rebond (0xFC95)

Connection_

Handle

Status

Table 75. Aci_Gap_Allow_Rebond command parameters

Connection_ Handle

2 bytes

Handle of the connection with

which Re-Bonding is required

Table 76. Aci_Gap_Allow_Rebond return parameters

Parameter

Size

Description

Status

1 byte

0x00: Success

Table 77. Aci_Gap_Start_Limited_Discovery_Proc

Command name

Parameters

Return

Aci_Gap_Start_Limited_Discovery_Proc (0xFC96)

Scan_Interval

Scan_Window

Own_Address_Type

filterDuplicates

Status

UM1865 데이터시트(PDF) 45 Page - STMicroelectronics

UM1865 데이터시트(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL