| 전자부품 데이터시트 검색엔진 |
|
LTC1069-6CS8 데이터시트(PDF) 3 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LTC1069-6CS8 데이터시트(HTML) 3 Page - Linear Technology |
|
3 / 8 page ![]() 3 LTC1069-6 fCUTOFF is the filter’s cutoff frequency and is equal to fCLK/50. The fCLK signal level is TTL or CMOS (clock rise or fall time ≤ 1µs) RL = 10k, VS = 5V, TA = 25°C, unless otherwise specified. All AC gains are measured relative to the passband gain. PARAMETER CONDITIONS MIN TYP MAX UNITS Gain at 2.00fCUTOFF VS = 5V, fCLK = 200kHz –66 –61 dB fTEST = 8.0kHz, VIN = 1VRMS q –66 –60 dB VS = 3V, fCLK = 200kHz –66 –60 dB fTEST = 8.0kHz, VIN = 0.5VRMS q –66 –59 dB Gain at 0.95fCUTOFF VS = 5V, fCLK = 400kHz, fTEST = 7.6kHz, VIN = 1VRMS – 0.5 0.15 0.5 dB VS = 3V, fCLK = 400kHz, fTEST = 7.6kHz, VIN = 0.5VRMS – 0.5 0 0.5 dB Output DC Offset (Note 1) VS = 5V, fCLK = 100kHz 50 175 mV VS = 3V, fCLK = 100kHz 30 135 mV Output DC Offset Tempco VS = 5V, VS = 3V 30 µV/°C Output Voltage Swing (Note 2) VS = 5V, fCLK = 100kHz 3.4 4.2 VP-P q 3.2 4.2 VP-P VS = 3V, fCLK = 100kHz 1.6 2.0 VP-P q 1.5 2.0 VP-P Power Supply Current VS = 5V, fCLK = 100kHz 1.2 1.60 mA q 1.65 mA VS = 3V, fCLK = 100kHz 1.0 1.40 mA q 1.55 mA Maximum Clock Frequency VS = 5V 1.0 MHz VS = 3V 0.7 MHz Input Frequency Range 0 <(fCLK – 2fC) Input Resistance 35 50 80 k Ω Operating Supply Voltage (Note 3) 310 V FREQUENCY (kHz) 20 –80 –78 –74 –72 –70 –60 –66 40 60 1069-6 G03 –76 –64 –62 –68 80 100 VS = SINGLE 3V fCLK = 500kHz fCUTOFF = 10kHz VIN = 0.5VRMS Transition Band Gain vs Frequency FREQUENCY (kHz) 10 –30 –10 10 18 1069-6 G02 –50 –70 –40 –20 0 –60 –80 –90 12 14 16 20 VS = SINGLE 3V fCLK = 500kHz fCUTOFF = 10kHz VIN = 0.5VRMS Stopband Gain vs Frequency FREQUENCY (kHz) 1 1 2 9 1069-6 G01 0 –1 –2 3 5 7 11 VS = SINGLE 3V fCLK = 500kHz fCUTOFF = 10kHz VIN = 0.5VRMS Passband Gain vs Frequency The q denotes specifications which apply over the full operating temperature range. Note 1: The input offset voltage is measured with respect to AGND (Pin 1). The input (Pin 4) is also shorted to the AGND pin. The analog ground pin potential is internally set to (0.437)(VSUPPLY). Note 2: The input voltage can swing to either rail (V + or ground); the output typically swings 50mV from ground and 0.8V from V +. Note 3: The LTC1069-6 is optimized for 3V and 5V operation. Although the device can operate with a single 10V supply or ±5V, the total harmonic distortion will be degraded. For single 10V or ±5V supply operation we recommend to use the LTC1069-1. TYPICAL PERFORMANCE CHARACTERISTICS ELECTRICAL CHARACTERISTICS |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |