MAX497CSLASHD datasheet(9/12 Pages) MAXIM

9 / 12 page

Power Dissipation

The maximum output current of the MAX496/MAX497 is

limited by the packages maximum allowable power dis-

sipation. The maximum junction temperature should not

exceed +150°C. The power dissipation increases with

load, and this increase can be approximated by the fol-

lowing:

For VOUT > 0V:

|VCC - VOUT| ILOAD

For VOUT < 0V:

|VEE - VOUT| ILOAD.

These devices can drive 100

Ω loads connected to

each of the outputs over the entire rated output swing

and temperature range. When driving 50

Ω loads with

each of the four outputs simultaneously, the output

swing must be limited to ±1.25V at TA = +70°C. While

the output is short-circuit protected to 170mA, this does

not necessarily guarantee that, under all conditions, the

maximum junction temperature will not be exceeded.

Do not exceed the derating values given in the

absolute maximum ratings.

375MHz Quad Closed-Loop

Video Buffers, AV = +1 and +2

_______________________________________________________________________________________

Ω CABLE

Ω

Ω CABLE

Ω

150

Ω

SOURCE:

TEKTRONIX

1910 DIGITAL GENERATOR

MEASUREMENT:

TEKTRONIX VM700

VIDEO MEASUREMENT

SET

MAX497

MAX496

DUT

Figure 2. Differential Phase and Gain Error Test Circuits: a) MAX497, Gain of +2 Amplifier; b) MAX496 Unity-Gain Amplifier

MAX496/MAX497

Ω

OUT1

OUT2

OUT3

OUT4

Ω

IN0

Ω

Figure 3. One-to-Four Distribution Amplifier

MAX497C/D 데이터시트(PDF) 9 Page - Maxim Integrated Products

MAX497C/D 데이터시트(HTML) 9 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

데이터시트 다운로드

링크 URL