| 전자부품 데이터시트 검색엔진 |
|
MAX532BC/D 데이터시트(PDF) 4 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX532BC/D 데이터시트(HTML) 4 Page - Maxim Integrated Products |
|
4 / 16 page ![]() Dual, Serial-Input, Voltage-Output, 12-Bit MDAC 4 _______________________________________________________________________________________ ELECTRICAL CHARACTERISTICS (continued) (VDD = 11.4V to 16.5V, VSS = -11.4V to -16.5V, AGNDA = AGNDB = DGND = 0V, VREFA and VREFB = +10V, RL = 2kΩ, CL = 100pF, VOUT_ connected to RFB_, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER CONDITIONS MIN TYP MAX UNITS SYMBOL VREF = 100mVp-p sine wave; DAC latch loaded with all 1s 1.0 MHz VREF = 20Vp-p 10kHz sine wave; DAC latch loaded with all 0s -77 dB Full-Power Bandwidth 125 kHz THD Total Harmonic Distortion -90 dB Output Noise Voltage 0.1Hz to 10Hz 2 µVRMS Digital Crosstalk DACA code all 1s, DACB code transition from all 0s to all 1s 10 nV-s Digital Feedthrough CS = 1; transitions on SCLK, LDAC, DIN 1.1 nV-s PARAMETER tCL CONDITIONS MIN TYP MAX SCLK Pulse Width Low UNITS SYMBOL fCLK tCH 80 ns tDS 50 ns tCSS1 CS Rise to SCLK Rise Setup Time SCLK Clock Frequency 50 ns tCSS0 CS Fall to SCLK Rise Setup Time 6.25 MHz 50 ns tDH DIN to SCLK Rise Hold Time 0 ns SCLK Pulse Width High 80 ns Multiplying Feedthrough Error Unity-Gain Small-Signal Bandwidth VREF = 20Vp-p sine wave; DAC latch loaded with all 1s VREF = 6VRMS, 1kHz sine wave; DAC latch loaded with all 1s Note 1: Static performance tested at VDD = +15V, VSS = -15V. Performance over supplies guaranteed by PSR test. Note 2: Guaranteed by design. Not subject to production testing. Note 3: Open-drain output. TIMING CHARACTERISTICS (VDD = 11.4V to 16.5V, VSS = -11.4V to -16.5V, AGNDA = AGNDB = DGND = 0V) (Notes 4, 5) tCSH0 SCLK Fall to CS Fall Hold Time 5 ns tCSH1 SCLK Rise to CS Rise Hold Time 80 ns tCSW CS Pulse Width High 120 ns tDO SCLK Fall to DOUT Valid (Note 6) CL = 20pF, RPULL-UP = 1kΩ to 5V 0 200 ns tDV CS Fall to DOUT Enable (Note 7) CL = 20pF, RPULL-UP = 1kΩ to 5V 100 ns tTR CS Rise to DOUT Disable (Note 7) CL = 20pF, RPULL-UP = 1kΩ to 5V 60 ns tLDAC LDAC Pulse Width Low 60 ns tLDACS CS Rise to LDAC Fall Setup Time 100 ns DIN to SCLK Rise Setup Time Note 4: All input signals are specified with tR = tF ≤ 5ns. Logic input swing is 0V to 5V. Note 5: See Figure 1. Note 6: Timing is for SCLK fall to DOUT fall to 0.8V, or for SCLK fall to DOUT rise to 2.4V. Additional time must be added for any larger passive RC pull-up delay. Note 7: DOUT enable: DOUT falls to 4.5V from 5.0V. DOUT disable: DOUT rises to 0.5V from 0V. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |