PIC16LC71 datasheet(42/176 Pages) MICROCHIP

42 / 176 page

PIC16C71X

DS30272A-page 42

7.4

A/D Conversions

Example 7-2 shows how to perform an A/D conversion.

The RA pins are conﬁgured as analog inputs. The ana-

log reference (VREF) is the device VDD. The A/D inter-

rupt is enabled, and the A/D conversion clock is FRC.

The conversion is performed on the RA0 pin (channel

0).

Clearing the GO/DONE bit during a conversion will

abort the current conversion. The ADRES register will

NOT be updated with the partially completed A/D con-

version sample. That is, the ADRES register will con-

tinue to contain the value of the last completed

conversion (or the last value written to the ADRES reg-

ister). After the A/D conversion is aborted, a 2TAD wait

is required before the next acquisition is started. After

this 2TAD wait, an acquisition is automatically started

on the selected channel.

Note:

The GO/DONE bit should NOT be set in

the same instruction that turns on the A/D.

EXAMPLE 7-2:

A/D CONVERSION

BSF

STATUS, RP0

; Select Bank 1

CLRF

ADCON1

; Configure A/D inputs

BCF

STATUS, RP0

; Select Bank 0

MOVLW

0xC1

; RC Clock, A/D is on, Channel 0 is selected

MOVWF

ADCON0

;

BSF

INTCON, ADIE

; Enable A/D Interrupt

BSF

INTCON, GIE

; Enable all interrupts

;

Ensure that the required sampling time for the selected input channel has elapsed.

;

Then the conversion may be started.

;

BSF

ADCON0, GO

; Start A/D Conversion

; The ADIF bit will be set and the GO/DONE bit

;

is cleared upon completion of the A/D Conversion.

PIC16LC71 데이터시트(PDF) 42 Page - Microchip Technology

PIC16LC71 데이터시트(HTML) 42 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL