CF5760 series

SEIKO NPC CORPORATION —5

Reset Function (optional seconds control function)

When AI/R goes active level for a reset, the motor output stops. When the reset is released, the first motor out-

put pulse occurs on the output pin opposite to that which had the last output pulse immediately before the reset.

Alarm Output

Alarm output waveform

F Output Function

The AON pin may be replaced by the F pin which is used to output a 32kHz signal (unaffected by the reset

function).

*1: Opposite phase to AO.

O1

(Active High)

O2

(Active High)

AI/R

(Active Low)

+0

−125msec

AO

(Active High)

AI/R

(Active High)

AON

(Active Low)

)

)

*1